+90 216 660 08 90
arelektrik@arelektrik.com

ARELPAN – W Drawer Type MCC Panels

ARELPAN – W Drawer Type MCC Panels Panel systems have been designed to meet the requirements of industrial facilities, power plants, iron and steel production facilities and petrochemical facilities, refinery and treatment facilities in accordance to IEC standards. ARELPAN-C Panels have been tested by KEMA Independent LABs in Prague to ensure user safety as a priority. ARELPAN-C Panels, passing the tests successfully, were awarded with IEC 61439-1 & 2 Kema Full Type Test Certification.

Advantages

IEC 61439-1 & 2 Type Test Certificate in KEMA Labs

CONNECT-(Power Contact are Closed)
DISCONNECT-(Power Contact are Opened)
TEST-(Control Circuit Can Be Tested)

Contact modules was developed with Fraunhofer – Institute Germany laboratories

IEC 61439-1 & 2 Type Test Certificate in KEMA Labs

CONNECT-(Power Contact are Closed)
DISCONNECT-(Power Contact are Opened)
TEST-(Control Circuit Can Be Tested)

Contact modules was developed with Fraunhofer – Institute Germany laboratories

Full Size Half Size Quarter Size
Up to 12 Modules Montage Capacity per Cabin Section
Up to 24 Modules Montage Capacity per Cabin Section
Up to 32 Modules Montage Capacity per Cabin Section
SELECTION TABLE FOR THE MCC DRAWER
Drawer Module Type Max Module Montage Capacity per Cabin Section Module Height Module Width Current Range Number of available auxiliary contacts pin
1/4 Quarter Size 32 225 mm  100 mm  0-32 A  32
1/2 Half Size 24 150 mm  220 mm  0-50 A  32
1/1 Full Size 12 150 mm  500 mm  80-125 A  32
6 300 mm  500 mm  160-250A  32
3 450 mm  500 mm  400-630A  32
3 600 mm  500 mm  400-630A  32

630 A, Form 4b, IP41, 65kA

Engine Control up to 300kW

It is equipped with MECHANICAL INTERLOCK devices against operator errors.

Mechanical coding is available, thus errors in different drawer type units are avoided (optional).

There is PLUG & RUN system that enables Drawers to plug in and take out to the panel, by switching on/off their connections to energized main bus-bar. This process is applicable by each drawer modules as they are independent from each other.

It passed ARK SAFETY test in accredited test laboratories

Contact points are self-cleaning type when turning them ON position, thus no maintenance is required.

It is possible to move power contacts when cables of power circuit is stable (Power cables should not be moved to avoid cable breaks.)

Innovative Pressure Contact

Main switch can only be operated when the door is closed

Cubicle door only opens in the disconnected position (can be overridden)

Unit can only be withdrawn if the main switch is disconnected power-circuit are disconnected at coming and outgoing.

Both withdrawable units and subsections can be excahnged or converted while the board is live.

Mechanical encoding available (option).

Coloured display showing the different positions of the drawer-unit

Modular and Functional Design

User Friendly Mechanism

Arc Protection System

Mechanical Safety Units

Special Design Possibility

Competitive Price and High Quality

PLUG & RUN securely with High Protection Contact Modules against ARC ERRORS!

Each contact is insulated between the phases and against the earth. In case of overload, the ionized gases can’t short-circuit the two phases or with the earth.

It provides the most economical quotation with the most appropriate dimensions according to the needs of your facility thanks to drawer units in different sizes.

Energized bus-bar insulating against to bare hand touching with automated bus-bar shutting system (Shutter system)

Phases between the vertical bus-bar section are fully insulated. It proves perfect protection even against strong dynamic loads.

Safety is a must!

Master switch can only be activated when the door is closed

It is possible to PLUG & RUN when master switch and units are disconnected

It is possible to PLUG & RUN when there is energy in main bus-bars as units are independent of each other

Mechanical coding is available, thus errors are avoided in different drawer type units (optional)

It is equipped with strong MECHANICAL INTERLOCK devices against operator errors

Standard Information

Rated Current, In

6300 A

Bus-bar Short-term Withstand Current, Icw

100kA

Internal Arc Test

65kA , 300 ms

Protection Class

IP41

Forming

Up to form 4b

Mechanical Impact Resistance

IK 10

Standard Color

RAL 7035, Elektrostatik

Carcass Material Type

Galvaniz

Distribution System

TN-C, TN-S, TN C-S, TT, IT

Operating Voltage, Ue

Up to 690 V

Impact Resistance Voltage, Uimp

8kV / 12kV

Operating Isolation Voltage, Ui

1000 V

Bus-bar Peak Withstand Current, Ipk

264 kA

Ambient Temperature

35 C (24h)

Forms of Seperation in LV Panels
IP & IK Protection Technicals

Strong Profile Structure

Modular Mechanical Assembly Units

Mounting Types are Available For All Brands

2 mm Galvanized Steel, RAL 7035 Colour

Stylish and Arty Outlook

Some Of Our References

Other Products